Norbar PneuTorque PTM/E Series

Norbar’s PTM/E series of Powered Pneumatic Torque Multipliers are purposely designed to be amongst the lightest and fastest on the market today.

PTM-52 

The 52mm diameter gearbox means that the Powered Torque Multiplier is lightweight and easy to manoeuvre. The PTM-52 series have a fast operation for rapid bolt run-down with some models generating a free speed 175 rpm. Low vibration levels also make these tools comfortable and safe to use.

PTM-72

The PTM-72 Powered Torque Multipliers use the same twin motor handle as the PTM-52, however with a slightly larger 72 mm gearbox they are able to achieve higher torque outputs. Features include:

  • Fast – capable of achieving free speeds between 70 and 140 rpm.
  • Lightweight.
  • Quiet – less than 85 dB(A) when in use.
  • Low vibration levels – make the tool comfortable and safe and easy to use.
  • Internal Control (IC) models incorporate torque transducer, torque setting and display panel and solenoid valve to shut off the air supply at the desired torque.
  • External Control (EC) models incorporate torque transducer and output for an external controller. Best suite for production/assembly lines.
  • Engineered to Order reaction accessories also available

PTME-72

Purpose built to meet the needs of the commercials vehicle market.  The specially designed reaction foot of the PTME-72 series of tools is able to better access recessed wheel bolts whilst the 72mm diameter gearbox handles the high frequency of use demanded by busy tyre shops.

PTM-92 & PTM-119

The most powerful of the PTM series the PTM-92 and PTM-119 of torque multipliers deliver an ideal balance between speed, weight and ease of usability. Features include:

  • The 2700 Nm version has a free speed of 46 rpm for rapid bolt run-down.
  • Lightweight – all models are fitted with a light yet sturdy aluminium reaction plate.
  • Quiet – noise levels register at less than 85 dB(A) when tool is in use.
  • Replaceable square drive.
  • Gearbox rotates independently from the handle to prevent operator injury.
  • A second trigger located on the back plate requires the operator to use both hands to operate the tool.  In this way the risk of the operators hands getting trapped between the reaction bar and reaction point.
  • Engineer to Order reaction accessories are also available upon request.

PTM-52-SERIES – STALL TOOLS – BI-DIRECTIONAL

18100.B06 ¾” sq. dr. 100-500 N m, 74 – 370 lbf.ft
18101.B06 ¾” sq. dr. 160-800 N m, 118 – 590 lbf.ft
Stall tools are also available as Forward Only tools, replace B with
F when ordering.

PTM-52-SERIES – SHUT OFF TOOLS – BI-DIRECTIONAL – INTERNAL

18110.B06 ¾” sq. dr. 100-500 N m, 74 – 370 lbf.ft
18111.B06 ¾” sq. dr. 160-800 N m, 118 – 590 lbf.ft

PTM-52-SERIES – SHUT OFF TOOLS – BI-DIRECTIONAL – EXTERNAL

18120.B06 ¾” sq. dr. 100-500 N m, 74 – 370 lbf.ft
18121.B06 ¾” sq. dr. 160-800 N m, 118 – 590 lbf.ft

PTM-52-SERIES WITH ANGLE CONTROL

18125.B06 ¾” sq. dr. 100-500 N m, 74 – 370 lbf.ft
18126.B06 ¾” sq. dr. 160-800 N m, 118 – 590 lbf.ft
18136.B06 ¾” sq. dr. 160-800 N m, 118 – 590 lbf.ft
All the above are supplied with a ¾” square drive (Part No. 18544).

ACCESSORIES

18545 1” square drive for above tools
*IC and EC tools are not supplied in a carry case.

PTM-72-SERIES – STALL TOOLS – BI-DIRECTIONAL

18102.B06 ¾” sq. dr. 200-1000 N m, 147 – 738 lbf.ft
18103.B08 1” sq. dr. 270-1350 N m, 200 – 1000 lbf.ft
18104.B08 1” sq. dr. 400-2000 N m, 295 – 1475 lbf.ft
Stall tools are also available as Forward Only tools, replace B with F when
ordering.

PTM-72-SERIES – SHUT-OFF TOOLS – BI-DIRECTIONAL – INTERNAL

18112.B06 ¾” sq. dr. 200-1000 N m, 147 – 738 lbf.ft
18123.B08 1” sq. dr. 270-1350 N m, 200 – 1000 lbf.ft
18124.B08 1” sq. dr. 400-2000 N m, 295 – 1475 lbf.ft

PTM-72-SERIES – SHUT-OFF TOOLS – BI-DIRECTIONAL – EXTERNAL

18122.B06 ¾” sq. dr. 200-1000 N m, 147 – 738 lbf.ft
18123.B08 1” sq. dr. 270-1350 N m, 200 – 1000 lbf.ft
18124.B08 1” sq. dr. 400-2000 N m, 295 – 1475 lbf.ft

PTM-72-SERIES – WITH ANGLE CONTROL

18127.B06 2/4” sq. dr. 200-1000 N m, 147 – 738 lbf.ft
18128.B08 1” sq. dr. 270-1350 N m, 200 – 1000 lbf.ft
18129.B08 1” sq. dr. 400-2000 N m, 295 – 1475 lbf.ft
18138.B08 1” sq. dr. 270-1350 N m, 200 – 1000 lbf.ft
*IC and EC tools are not supplied in a carry case

PTME-72-SERIES – STALL TOOLS – BI-DIRECTIONAL

18140.B06 PTME-72-1000-B Bi-Directional ¾” sq. dr.
18149.B08 PTME-72-1000-B Bi-Directional 1” sq. dr.
18141.B08 PTME-72-2000-B Bi-Directional 1” sq. dr.
Stall tools are also available as Forward Only tools, replace B with F when
ordering.

PTME-72-SERIES – SHUT-OFF TOOLS – BI-DIRECTIONAL – INTERNAL

18142.B06 PTME-72-1000-B-IC Bi-Directional ¾” sq. dr.
18143.B08 PTME-72-2000-B-IC Bi-Directional 1” sq. dr.

PTME-72-SERIES – SHUT-OFF TOOLS – BI-DIRECTIONAL – EXTERNAL

18144.B06 PTME-72-1000-B-EC Bi-Directional ¾” sq. dr.
18145.B08 PTME-72-2000-B-EC Bi-Directional 1” sq. dr.
*IC and EC tools are not supplied in a carry case.

PTM-92-SERIES – STALL TOOLS – BI-DIRECTIONAL

18106.B08 PTM-92 l” sq. dr. 540-2700 N m, 400-2000 lbf.ft
18119.B08 PTM-92 l” sq. dr. 800-4000 N m, 590-2950 lbf.ft
18119.B12 PTM-92 1½” sq. dr. 800-4000 N m, 590-2950 lbf.ft
Also available as Forward Only tools, replace B with F when
ordering. Stall tools are supplied in a carry case.

PTM-119-SERIES – STALL TOOLS – BI-DIRECTIONAL

18108.B121½” sq. dr. 900-4500 N m, 660-3300 lbf ft
18109.B121½” sq. dr. 1200-6000 N m, 885-4500 lbf ft
Also available as Forward Only tools, replace B with F when
ordering. Stall tools are supplied in a carry case.

PTM DUAL TRIGGER – BI-DIRECTIONAL

18100.B06.DT PTM-52 ¾” sq. dr. 100-500 N m, 74-370 lbf.ft
18101.B06.DT PTM-52 ¾” sq. dr. 160-800 N m, 118-590 lbf.ft
18102.B06.DT PTM-72 ¾” sq. dr. 200-1000 N m, 147-738 lbf.ft
18103.B08.DT PTM-72 l” sq. dr. 270-1350 N m, 200-1000 lbf.ft
18104.B08.DT PTM-72 l” sq. dr. 400-2000 N m, 295-1475 lbf.ft
18106.B08.DT PTM-92 l” sq. dr. 540-2700 N m, 400-2000 lbf.ft
18119.B08.DT PTM-92 1½” sq. dr. 800-4000 N m, 590-2950 lbf.ft
18119.B12.DT PTM-92 1” sq. dr. 800-4000 N m, 590-2950 lbf.ft
18108.B12.DT PTM-119 1½” sq. dr. 900-4500 N m, 660-3300 lbf.ft
18109.B12.DT PTM-119 1½” sq. dr. 1200-6000 N m, 885-4500 lbf.ft

How To Use PneuTorque